Geemarc Ampli555 Manual page 29

CID Talking
The talking CID can announce the number that comes in unless
the caller blocks the number, so this feature allows you to check
the caller ID number or caller's name when a new call is receiving
without looking at the display. Note that if you have stored a
number in phone book and recorded the corresponding name,
when an incoming call with this number comes in, the system will
announce the name associates with this number.
1. Press Menu soft key to display the main menu list.
p or q
2. Press
Select soft key.
q
3. Press the
key.
p or q
4. Use
the CID talking function, press Select soft key to confirm.
Review Talking
The system can announce the number that stored in phone book
when you are reviewing the phone book, so the feature allows you
to check these numbers when you use
through the phone book entries. Note that if you have recorded
the corresponding name, the system will announce the name
associates with this number. To activate this feature, do the
following steps:
1. Press Menu soft key to display the main menu list.
p or q
2. Press
Select soft key.
p or q
3. Press
TALKING, press Select soft key.
p or q
4. Use
the CID talking function, press Select soft key to confirm.
MENU FUNCTIONS
key repeatedly to move to Set Talk, press
key to move to CID TALKING, press Select soft
key to select ON/OFF to activate / deactivate
key repeatedly to move to Set Talk, press
key repeatedly to move to REVIEW
key to select ON/OFF to activate / deactivate
p or q
28
key to scroll