Table of Contents
Advertisement
The feature allows the caller to leave a message to the owner
who is not at home. When a call is received in TAM on mode, the
machine will play the OGM, and then performs message
recording. The process is as follows:
After N times ringing, the phone enters answer-record mode
automatically and starts to play OGM. The caller can start to
record message after a tone. Each ICM can be up to 3 minutes.
To play messages via the speaker, press the
state. You can also play messages via the receiver by pressing
the
key after lifting the handset. Notice that you should
insert the telephone line cord in advance. The phone will
announce "You have N new message(s)" or "You have N old
message(s)". The relevant messages will be played one by one.
During the process you can do the following steps:
• Press the DEL key to delete the current message.
• Press the
• Press the
• Press the
• Press the
• To adjust the announce volume, use the Volume Controls
or
also press the AMPLI key to further enhance the volume.
Record the Memo
You can use your phone to record memo messages (each can be
up to 3 minutes) for another user of your phone. The memo can
be played as an incoming message.
To record the memo, press and hold the MEMO key in standby
mode. The display will show Memo and start the recording. The
MENU FUNCTIONS
key once to re-play the current message.
key twice to play the previous message.
key to play the next message.
key again to stop the playing and exit.
on the right side of the phone. You can
31
key in on-hook
Advertisement
Table of Contents
