Mercury 200 OptiMax DTS Owner's Manual page 64

3. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2-4-C with Teflon or Special Lubricant
101.
• Alternator Belt Tensioner Pivot Shaft - Lubricate through fitting.
• Swivel Bracket - Lubricate through fitting.
• Tilt Support Lever - Lubricate through fitting.
a - Swivel bracket
• Tilt Tube - Lubricate through fitting.
The end of the steering cable must be fully retracted into the outboard tilt tube before adding lubricant. Adding
lubricant to steering cable when fully extended could cause steering cable to become hydraulically locked. A
hydraulically locked steering cable will cause loss of steering control, possibly resulting in serious injury or death.
• Steering Cable - Rotate steering wheel to fully retract the steering cable end into the outboard tilt tube.
Lubricate through fitting.
MAINTENANCE
b -
WARNING
!
60
2884
a
b
ob00683
Tilt support lever
ob00684