Table of Contents
Advertisement
Chapter 7 SPECIFICATIONS
7.3 DISPLAY UNIT
7.3 DISPLAY UNIT
7.3.1
INTEGRATED DISPLAY UNIT (NCD-2237)
(1) Structure
(2) Dimensions
(3) Mass
(4) Tune Method
(5) STC (SEA)
(6) FTC (RAIN)
(7) Radar Interference Rejection
(8) Bearing Marker
(9) Heading Line
(10) Off Center
(11) True Motion Unit
(12) True Motion Reset Position
(13) Radar trail indication
True motion mode:
Relative motion mode:
Trail time length:
(14) Variety of Pulse width
(15) Target enhance
(16) Plotting
(17) Display color
Radar echo
Radar trails
Time trails
Continuous trails
7-6
Desk Top Integrated Type (LCD Monitor Unit/Keyboard
Unit/Processor Unit Integrated Structure)
Vertical installation only desk top integrated type
Height 242mm × Width 278mm × Depth 275mm
Approx. 8kg
MANUAL/AUTO (Bar-graph indication)
MANUAL/AUTO
MANUAL/AUTO
Built-in (The effect can be adjusted by three stages.)
360° in 5° digit
Electronic
Within 66% of the radius of PPI
Transition of the radar trails is possible during Off Center
mode.
Built-in
66% of radius of any range
Only true motion trails
True motion trails or relative motion trails can be
selected.
15sec/30sec/1min/2min/3min/6min/10min/15min/
Continuous
Arbitrary trail time length can be displayed at any time.
When changing the motion mode, the trails can be
succeeded.
Short/Middle/Long (depending on range)
Range and bearing
Line: Line type can be selected.
Mark: Mark type can be selected.
200 marks or lines can be used.
Monochromatic
Monochromatic, 16 stages
Advertisement
Table of Contents
