Table of Contents
Advertisement
The RS232 interface is shown as in Figure 5-77.
Please refer to the following sheet for detailed information.
Parameter Function
Select the corresponding dome protocol.
Protocol
Default setup is console.
Select the baud rate.
Baud Rate
Default setup is 115200.
Data Bit
The value ranges from 5 to 8.
Default setup is 8.
There are two options: 1/2.
Stop bit
Default setup is 1.
Parity
There are five options: none/odd/even/space/mark.
Default setup is none.
5.8.5.5 PTZ
The PTZ interface is shown as in Figure 5-78.
Before setup, please check the following connections are right:
PTZ and decoder connection is right. Decoder address setup is right.
Decoder A (B) line connects with DVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to
control speed dome.
Please refer to the following sheet for detailed information.
Figure 5-77
Figure 5-78
208
Advertisement
Table of Contents
