Security Camera King DVR-CVI8240M User Manual page 184

Parameter
Mode
Mac Address
IP Version
IP Address
Preferred DNS
Alternate DNS
For the IP address of IPv6 version, default gateway, preferred DNS and
alternate DNS, the input value shall be 128-digit. It shall not be left in blank.
LAN load
5.8.2.2 Connection
The connection interface is shown as in Figure 5-23.
Please refer to the following sheet for detailed information.
Parameter
Max connection
Function
There are two modes: static mode and the DHCP mode.

The IP/submask/gateway are null when you select the
DHCP mode to auto search the IP.

If you select the static mode, you need to set the
IP/submask/gateway manually.

If you select the DHCP mode, you can view the
IP/submask/gateway from the DHCP.

If you switch from the DHCP mode to the static mode, you
need to reset the IP parameters.

Besides, IP/submask/gateway and DHCP are read-only
when the PPPoE dial is OK.
It is to display host Mac address.
It is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
Please use the keyboard to input the corresponding number to
modify the IP address and then set the corresponding subnet
mask and the default gateway.
DNS IP address.
Alternate DNS IP address.
System can process the downloaded data first if you enable this
function. The download speed is 1.5X or 2.0X of the normal
speed.
Figure 5-23
Function
It is the max Web connection for the same device. The value
ranges from 1 to 120. The default setup is 120.
175