Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Function
Here you can view channel number.
Channel
The number displayed here is the max channel amount of your
device.
Status
There are three statuses: schedule, manual and stop.
System enables auto record function as you set in record schedule
Schedule
setup (general, motion detect and alarm).
It has the highest priority.
Manual
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop current channel record no matter what period applied in the
Stop
record setup.
Check the corresponding All button, you can enable or disable all
Start all/
stop all
channels record.
5.8.4.4 Advanced
5.8.4.4.1 Main Stream
The main stream interface is shown as in Figure 5-67. Here you can set corresponding
HDD group to save main stream.
Figure 5-66
202
Advertisement
Table of Contents
