Table of Contents
Advertisement
Color mode
5.8.1.2 Encode
5.8.1.2.1 Encode
The encode interface is shown as below. See Figure 5-17.
Please refer to the following sheet for detailed information.
Parameter
Channel
Video enable
Code stream
type
Compression
Resolution
from 40 to 60.
It includes several modes such as standard, color. You can
select corresponding color mode here, you can see hue,
brightness, and contrast and etc will adjust accordingly.
Figure 5-17
Function
Please select a channel from the dropdown list.
Check the box here to enable extra stream video. This item is
enabled by default.
It includes main stream, motion stream and alarm stream. You
can select different encode frame rates form different recorded
events.
System supports active control frame function (ACF). It allows
you to record in different frame rates.
For example, you can use high frame rate to record important
events, record scheduled event in lower frame rate and it allows
you to set different frame rates for motion detection record and
alarm record.
The main bit stream supports H.264. The extra stream supports
H.264, MJPG.
For analog channel, system supports various resolutions, you
can select from the dropdown list. Please note the option may
vary due to different series. For digital channel, the resolution
171
Advertisement
Table of Contents
