Please refer to the following sheet for detailed information.
Parameter
Function
Check the box here to enable tour function.
Enable tour
Here is for you to adjust transparency. The value ranges from 5 to
Interval
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
Split
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode.
Motion
System supports 1/8-window now.
tour/Alarm
tour
5.8.5.3 Video Matrix
The interface is shown as in Figure 5-76.
Here you can set video output channel and interval. It supports 1/4 spot tour.
5.8.5.4 RS232
Figure 5-75
Figure 5-76
207