Security Camera King DVR-CVI8240M User Manual page 168

4.10.5.9 Config Backup
The configuration file backup interface is shown as below. See Figure 4-123.
This function allows you to import/export system configuration. You can use this function
when there are several devices need the same setup.

Export: Please connect the peripheral device first and then go to the following
interface. Click Export button, you can see there is a corresponding "Config_Time"
folder. Double click the folder, you can view some backup files.

Import: Here you can import the configuration files from the peripheral device to
current device. You need to select a folder first. You can see a dialogue box asking
you to select a folder if you are selecting a file. System pops up a dialogue box if
there is no configuration file under current folder. After successfully import, system
needs to reboot to activate new setup.

Format: Click Format button, system pops up a dialogue box for you to confirm
current operation. System begins format process after you click the OK button.
Note:

System can not open config backup interface again if there is backup operation in the
process.

System refreshes device when you go to the config backup every time and set
current directory as the root directory of the peripheral device.

If you go to the configuration backup interface first and then insert the peripheral
device, please click Refresh button to view the newly added device.
Figure 4-122
159