Duplex tests
The following tests are used to determine if the duplex is working correctly:
•
•
•
•
•
Quick Test
The Quick Test contains the following information on a duplexed page:
•
•
•
•
To print the duplexed Quick Test page:
1.
Select Quick Test from the DUPLEX TESTS menu.
2.
Select Single or Continuous by pressing
3.
Press
Top Margin
1.
Select Top Margin from the DUPLEX TESTS menu.
2.
To change the margin value, press
3.
Press
Left Margin
1.
Select Left Margin from the DUPLEX TESTS menu.
2.
To change the margin value, press
3.
Press
Sensor Test
This test is used to determine if the input sensor is operating correctly.
•
•
Quick Test
Top Margin
Left Margin
Sensor Test
Duplex Feed 1
Print registration settings
Alignment diamonds at the top and bottom
Horizontal lines to check for skew
General printer information, including current page count, installed memory, serial number,
and code level.
to print the page.
to save the desired margin value.
to save the desired margin value.
If the sensor is operating correctly, then OP (Open) will appear on the display:
to return to the DUPLEX TESTS menu.
Press
or
.
to increase the value or
to increase the value or
Sensor Test
Input=OP
4513-420, -430
to decrease the value.
to decrease the value.
Diagnostic aids
3-9