C Amera Function - JabloCom EYE-02 User Manual

C
AMERA FUNCTION
C M
AMERA ODES
The EYE-02 camera has three main working modes:
Mode
SLEEP mode is a stand-by mode of camera. The camera doesn't detect any
movement in the targeted area and the major detectors are disabled. The
SLEEP
only active detectors are the those which protect camera itself against the
In WATCH mode camera guards fully the targeted area, all detectors are
WATCH
CONFIG mode allows the user to change camera's settings, enroll a new
external device (as remote control) to cooperate with camera or enroll a new
CONFIG
R
EMOTE CONTROL
The package contains a wireless remote control (type RC-86), which can be used
to switch between camera modes – see detail of each button's function in the
table above.
Camera confirms a change of mode by LED lights on the front panel and also by a
beep signal.
Camera
mode
WATCH
SLEEP Green light is permanently
CONFIG Red and Green lights blink
slowly together
ENROLL Red and Green lights swap
ERROR Red light is permanently
EYE-02 User Guide
Description
unwanted manipulation by some intruder.
user contacts (see more details in
LED lights signaling
Lights are Off
On
blinks slowly
On
S L E E P W A T C H
S L E E P , W A T C H and
active
CONFIG mode chapter)
Sound signal
One long
beep
Two long
beeps
Three long
beeps
-
Four short
beeps
- 4 -
C O N F I G
C O N F I G .
Button on Remote
control
press and
together