M Onitoring - JabloCom EYE-02 User Manual

Table of Video parameters
Image size
Image quality
Filter fluorescent lamps
Brightness compensation
Expected speed of the objects (Shutter
speed)
After ALARM keep on recording video
for
Snapshoot rate
O V O
THER IDEO PTIONS
•
Only save pictures when a motion is detected
•
Disable build-in infrared lamp
•
Capture video when PIR or MIP activity in SLEEP mode
•
Send video as separate JPEG pictures – JPG pictures will be send by e-mail and MMS
instead of AVI video files
•
Insert date and time into picture
M
ONITORING
The camera can report all events from the system to Alarm Receiving Centre - ARC (also known as
Central Monitoring Station).
The reports are done in accordance with international standard communication protocols for IP CID
and SMS CID. Protocol setting will be done by authorized ARC service provider once you subscribe
their service.
JabloTool web can also provide monitoring function for registered users. Your camera can make a
copy of any event record to JabloTool. This will dramatically
and provide the backup log of events. This function is available for FREE for users who pass their
registration at www.jablotool.com.
EYE-02 User Guide
160x120, 320x240, 640x480 pixels
5 levels of JPEG compression
(OFF, 50Hz, 60Hz), default OFF
+/- 2EV, with step 0.5EV, default 0
(fast, normal, slow), default normal
(0 sec, 5sec, 10sec ,... 2 min, 5 min, 10 min)
from 20 frames per sec, to 1 frame every 30sec
speed
up your access to the event list
- 16 -