JVC HM-DR10000EK Instructions Manual page 67

1 – –:– –
2
1 2 3
4 5 6
3
4
7 8 9
4
0
3
1
2
6
7
MENU
OK
8
NOTES:
Just Clock (when set to "ON") adjusts the recorder's built-in
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
Just Clock is not effective when . . .
– the recorder's power is on.
– the recorder is in the Timer mode.
– a difference of more than 3 minutes exists between the
built-in clock's time and the actual time.
– the recorder is in the Auto Satellite Prog Rec mode
(
If Just Clock is set to "ON", the recorder's clock is automati-
cally adjusted at the start/end of Summer Time.
Just Clock may not function properly in poor reception
conditions.
SET JUST CLOCK
The default setting is "ON". Set as desired by pressing
%fi, then press OK or #.
For the Just clock function,
If you set to "OFF", you can disregard the next step as
you won't be able to receive regular clock adjustments.
SET CLOCK DATA SOURCE
PRESET
The recorder is preset to receive clock setting and
adjustment data from preset position 1. Press %fi to set
the preset position to the number representing the
station transmitting clock setting data (BBC1, BBC2,
etc.), then press OK or #.
START CLOCK OPERATION
Press MENU.
pg. 40).
67
"Just Clock" on page 66.