Edit From A Camcorder - JVC HM-DR10000EK Instructions Manual

D-vhs digital recorder
Table of Contents

Advertisement

46
Edit From
A Camcorder
1
2
1
4
7
NUMBER "0"
1
2
NOTES:
All necessary cables can be obtained from your dealer.
You can also use another video recorder as the player instead
of a camcorder.
When you select EDIT to dub tapes in step 4, be sure to select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
When you are editing through the DV IN connector, the
recorder will stop if the player begins playing a blank portion
of tape or the signal is interrupted.
– –:– –
2
3
5
6
3
4
8
9
4
0
3
TV PROG
ADVANCED OPERATIONS (cont.)
You can use a camcorder as the source player and your video
recorder as the recorder.
You can perform digital editing if the camcorder has a DV
output connector.
MAKE CONNECTIONS
1
A If the camcorder has no S-VIDEO output connector...
... connect the camcorder's AUDIO/VIDEO OUT
connectors to the recorder's front panel AUDIO/
VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector...
... connect the camcorder's S-VIDEO OUT and
AUDIO OUT connectors to the recorder's front
panel S-VIDEO and AUDIO input connectors.
A
C If the camcorder has a DV OUT connector...
... connect the camcorder's DV OUT connector to
the recorder's DV IN connector.
See "DV Sound Setting" (
selection.
When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO L input
connector on your recorder.
When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder's instruction manual
for operating procedure.
SET RECORDING MODE
2
Set the appropriate recording mode (D-VHS, S-VHS or
VHS) (
pg. 14, 15, 32, 33).
SET RECORDER'S INPUT
MODE
3
Press NUMBER key "0" and/or TV PROG to select "F-1"
for the AUDIO/VIDEO input connectors, "S-2" for the
AUDIO/S-VIDEO input connectors, or "I-1" for the DV
input connectors, depending on the connectors being
used.
SET EDIT MODE (S-VHS/
VHS MODE ONLY)
4
See "Picture Control" on page 45.
START CAMCORDER
5
Engage its Play mode.
START RECORDER
6
Engage its Record mode.
pg. 47) for the DV sound

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents