JVC HM-DR10000EK Instructions Manual page 49

A
TV Receiver
(AV mode)
21-pin SCART Cable
(not provided)
Recorder
C
TV Receiver
(AV mode)
S-Video Cable
(provided)
21-pin SCART Cable
(not provided)
Player
NOTES:
All necessary cables can be obtained from your dealer.
For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (
If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this
recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its rear panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors.
Then, set the recorder's input mode to "S-1".
Player
Your recorder
21-pin SCART
Cable (provided)
Another recorder
Recorder
Your recorder
21-pin SCART
Cable (provided)
Another recorder
B
Recorder
Your recorder
21-pin SCART Cable
(provided)
Another recorder
Player
49
TV Receiver
(AV mode)
21-pin SCART Cable
(not provided)
pg. 47).