Connecting To A Monitor; Connecting To Power - Sony CAM-90 Installation Manual

When using a CS-Mount lens
Please take off the lens protection cap and attach
the CS-Mount lens to the camera by screwing it in
clockwise.
When using a C-Mount lens
1. Please take off the lens protection cap and
attach the C-mount adaptor.
2. Please attach the C-Mount lens to the
camera by screwing it in clockwise.
Note
• Please use the specified lens connection parts as shown in the picture below.
The use of the wrong sized parts may cause damage
to the inside of the camera or result in poor fitting.
• Use of a lens which is too heavy affects the balance
of the camera and may cause a malfunction. Please
use a lens that weighs less than 450g.
• Please select Av mode if possible when adjusting
the automatic light control (ALC) of an auto lens.
Use of PK mode may cause hunting.
16
Digital Day&Night Color Camera
Installation

Connecting to a monitor

Please connect the video output terminal located on the back of the
camera to the monitor.
• The connection method varies depending on the type of monitor and
accessories. Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.

Connecting to power

Please check the standard power requirement before connecting
to power.
Dual Power Type
(AC 24V/DC 12V, AC 24V Class2)
17
Digital Day&Night Color Camera