Table of Contents
Advertisement
Camera Operation
SETUP
Select any function you
LENS
MANUAL
wish to operate by
SHUTTER
ESC
using the UP and
WHITE BAL.
ATW
DOWN buttons.
BACKLIGHT
OFF
AGC
LOW
DNR
LOW
SENS-UP
OFF
SPECIAL
EXIT
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes
are displayed in order. Please keep pressing the button until you get to the
mode you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
Note
• If
appears at the mode you wish to operate, it means that there is a
sub-menu which can be selected by pressing the SETUP button.
• If
appears at the mode item, it means that there is no mode
available to be selected.
LENS (selection)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position
the arrow to point to 'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the
LEFT or RIGHT button.
SETUP
LENS
DC
SHUTTER
---
WHITE BAL.
ATW
BACKLIGHT
OFF
20
Digital Day&Night Color Camera
DC : Auto iris lens selection
Modes can be changed
Note
using the LEFT and
RIGHT buttons.
• When using an auto iris lens, the setting of the auto iris lens selection
switch, located on the back of the camera, must be on DC or VIDEO
depending on the type of the lens which is being used. (Please refer
to the picture on page 15)
• The brightness of the screen can be adjusted in DC mode. The
brightness can be adjusted within the range of 1 ~ 70. The optimum
level of brightness for the user can be achieved by adjustment.
MANUAL : Manual lens selection
3. Please press the SETUP button if you wish to return to the previous
menu
21
Digital Day&Night Color Camera
Advertisement
Table of Contents
