Connection Between Cameras And Pcs - Panasonic WJ-ND200 Installation Manual

Connection between cameras and PCs

When connecting the unit and PCs through a hub, use a LAN cable to connect between the unit and a hub.
Cameras should also be connected through a hub using LAN cables.
Important:
When connecting the unit and a PC directly without using a hub, connect them using a cross LAN cable.
<Connecting PCs using an ADSL line>
Network Camera
Network Camera
Note:
When using a router, MPEG-4 images sometimes may not be displayed. Refer to the network administrator for how to con-
figure the settings of the router.
ADSL router
ADSL line
HUB
LAN cable
(Not provided: 10BASE-T/100BASE-Tx,
category 5, straight)
ALARM
10/100BASE-T
ALARM/CONTROL
This unit
Internet
PC
SIGNAL GND
ON
OFF
AC IN POWER
PC
15