Connection; How To Connect The Unit With Pcs And Cameras - Panasonic WJ-ND200 Installation Manual

Connection

The following are descriptions of how to connect the unit with PCs and cameras. Required devices and cables vary depending
on how to connect them. Before starting the connections, check the required devices and cables for your environment.

How to connect the unit with PCs and cameras

Connect cameras and PCs using the network port on the rear of the unit. The following are descriptions of how to connect the
unit with PCs and cameras using a hub (as shown in the illustration below).
Images (video signals) from cameras will be supplied to the network port and supplied to PCs from the unit.
14
Network Cameras
Hub
10/100BASE-T
PC
LAN cable
(Not provided: 10BASE-T/100BASE-Tx,
category 5, straight)
SIGNAL GND
ALARM
ALARM/CONTROL
This unit
PC
ON
OFF
AC IN POWER