Connections; Connection Of Cameras And A Mouse - Panasonic WJ-NX400K/GJ Installation Manual

3 Connections

Connection of cameras and a mouse

Up to 128 cameras can be connected to the recorder via a switching hub.
Connect to the Camera/PC port of the recorder.
Use a Ethernet cable (straight) to connect the recorder and the switching hub.
Connect the provided mouse to the mouse connection port on the front or rear side of the recorder.
Recorder
Mouse (provided)
Note:
• Make sure to use the wired network to connect with the recorder even for the cameras equipped with the wireless LAN func-
tion.
Ethernet cable (locally procured):
category 5e or better (straight) for
WJ-NX400K, category 7 (straight) for
WJ-NX400K/G
PoE hub
Network camera (x 128 max.)
(When 2 licenses are used for the additional camera kit)
15