Specifications; Standard Accessories - Panasonic WJ-ND200 Installation Manual

Specifications

General
Power source
Power consumption
Ambient operating temperature
Ambient operating humidity
Maximum operating altitude
Dimensions
Weight
HDD
HDD type/function
Input/Output
ALARM/CONTROL connector
ALARM connector
Network port
Maintenance port
1
* : Non-voltage make contact, 100 mA, +5 V pull-up
2
* : Open collector output, maximum under conditions of 24 V DC and 100 mA or less
3
* : HIGH (+5 V - +12 V, 6.3 mA max.)
4
* : 52 kΩ, 5 V pull-up, –100 mA/make contact
5
* : 200 mA max.

Standard Accessories

CD-ROM* ................................................................................................ 1 pc.
Installation Guide (this manual) .............................................................. 1 pc.
* The CD-ROM contains the operating instructions (PDFs).
The following are for installation:
Power Cord (NTSC model) ..................................................................... 1 pc.
Power Cord (PAL model) ........................................................................ 1 pc.
Key .......................................................................................................... 2 pc.
Brace (for the power cord) ..................................................................... 1 pc.
NTSC model: 120 V AC, 60 Hz
PAL model: 220 V- 240 V AC, 50 Hz
Approx. 35 W
+5 °C - +45 °C {41 °F - 113 °F}
5 % - 90 % (non condensing)
2 000 m (610 feet) above sea level
270 mm (W) x 88 mm (H) x 360 mm (D) {10-5/8" (W) x 3-1/2" (H) x 14-1/4" (D)}
(excluding rubber feet and projections)
WJ-ND200 5.0 kg {11 lbs.}
2.5" removable HDD x2
Mirroring mode available (only when 2 HDDs are installed)
2
Alarm output 8-16* , Network error output*
1
input * , Available disk space warning output*
2 2
put* , Error output* , Power outage recovery completion output*
4
input/output* , Alarm suspension input*
recording mode switching*
1
Alarm input 1-16* , Alarm output 1-7*
10BASE-T/100BASE-TX (RJ-45)
10BASE-T (RJ-45)
2
, Alarm reset input*
2
, HDD error output*
1
, Power outage detection input*
1 5
, +5 V output* (D-sub 25-pin)
2
(D-sub 25-pin)
1
, Emergency recording
2
, Camera error out-
3
, Time adjustment
1
, External
29