Table of Contents
Advertisement
11.1.9 +CSAS Save settings
Command
execute
+CSAS[=<profile>]
test
+CSAS=?
Optional. 07.05 section 3.3.5. Saves SMS settings (+CSMP and +CSCA parameters) to non-
volatile memory (usually SIM). First <profile> location is 1. SMSC address is not stored if
+CSCA is not set/restored during the current session (i.e. +CSCA? returns +CSCA: "",129).
Validity period is not stored if <fo> does not indicate the relative validity period format (i.e.
bits 4-3 are not '10'). NOTE: The values that are not stored shall remain intact in the
<profile>.
11.1.10
+CRES Restore settings
Command
execute
+CRES[=<profile>]
test
+CRES=?
Optional. 07.05 section 3.3.6. Restores SMS settings (+CSMP and +CSCA parameters) from
non-volatile memory (usually SIM). First <profile> location is 1. In addition, if validity
period is returned, <fo> is forced to indicate relative validity period format (i.e. bits 4-3 are
set to '10').
11.1.11
+CNMI New message indications to TE
Command
set
+CNMI=[<mode>[,<mt
>[,<bm>[,<ds>[,<bf
r>]]]]]
read
+CNMI?
test
+CNMI=?
Mandatory when messages can be received directly to TE. 07.05 section 3.4.1. <bm>=1 is
not implemented in the Nokia D211 (requires CBM memory in ME).
Note: SMS cannot be controlled using AT command because the Nokia D211
SMS application (Nokia Short Messaging) controls them.
Response
+CSAS: (<profile>-list)
Response
+CRES: (<profile>-list)
Response
+CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
+CNMI: (0-2),(0-3),(0,2,3),(0-2),(0,1)
Default
+cms error
x
[1]
x
Default
+cms error
x
[1]
x
Default
0,0,0,0,0
+cms
error
x
73/113
Advertisement
Table of Contents
