Table of Contents
Advertisement
- if <dcs> indicates that 8-bit data coding scheme is used: ME/TA converts each
8-bit octet into two IRA character long hexadecimal number (e.g. octet with
integer value 42 is presented to TE as two characters 2A (IRA 50 and 65))
<dcs>: GSM 03.38, Cell Broadcast Data Coding Scheme in integer format
(default 0)
<m>:
0
no further user action required (network initiated USSD-Notify, or no further
information needed after mobile initiated operation)
1
further user action required (network initiated USSD-Request, or further
information needed after mobile initiated operation)
9.1.12 +CAOC Advice of charge
Command
execute
+CAOC=[<mode>]
read
+CAOC?
test
+CAOC=?
Optional. 07.07 section 7.15. Returns current call meter value (in home units) from ME. The
unsolicited result code +CCCM: <ccm> is sent when the CCM value changes, but not more
that every 10 seconds. Deactivation of the unsolicited event reporting is made with the same
command.
Parameters:
<ccm>:
string type; three bytes of the current call meter value in hexadecimal format
(e.g. "00001E" indicates decimal value 30); value is in home units, and bytes are similarly
coded as the ACMmax value in the SIM.
9.1.13 +CSSN Supplementary service notifications
Command
set
+CSSN=<n>,<m>
read
+CSSN?
test
+CSSN=?
Optional. 07.07 section 7.16. Controls presentation of +CSSI intermediate result code and
+CSSU unsolicited result code.
Parameters:
<n>:
parameter sets/shows the +CSSI result code presentation status in the TA:
0
disable
1
enable
<m>:
parameter sets/shows the +CSSU result code presentation status in the TA:
0
disable
1
enable
Response
+cme error
x
[+CAOC: <ccm>]
+CAOC: <mode>
+CAOC: (0-2)
Response
+CSSN: <n>,<m>
+CSSN: (0,1),(0,1)
Default
0,0
68/113
Advertisement
Table of Contents
