Table of Contents
Advertisement
16.3.5 +CLIP Calling line identification report
Format
+CLIP: <number>,<type>[,
<subaddr>,<satype>[,<alpha>]]
07.07 section 7.6. This result code is sent to TE after every RING (or +CRING) result code.
Subaddress and alpha are not supported by the Nokia D211.
16.3.6 +CSSU Unsolicited supplementary service notification
Format
+CSSU: <code2>[,<index>[,<number>,
<type>[,<saddr>,<satype>]]]
07.07 section 7.16. In case of a MT call setup, this result code is sent to the TE after every
(possible) +CLIP result code. In case of a waiting call, this is given after the +CCWA result
code (but discarded if the TA is in on-line data state "disabled" or "not supported").
Supported <code2>s depend on the supplementary services implemented in a product.
16.3.7 +CCWA Call waiting
Format
+CCWA: <number>,<type>,<class>[,<alpha>]
07.07 section 7.11. Note that this result code is not repeated similarly as RING, but given
only once. Alpha is not supported by the Nokia D211.
16.3.8 +CREG Network registration
Format
+CREG: <stat>[,<lac>,<cid>]
07.07 section 7.2.
Description
given when +CLIP=1 and number received from network when
MT call received (no active or held calls in ME)
Description
given when +CSSN=,1 and some supplementary service notification
is given by the network during a MT call setup, during a voice call, or
whenever in case of forward check SS notification; note that also
remote release of a held call is informed with this result code
Description
given when +CCWA=1 and an incoming MT call is received when
there are active or held calls in the ME (discarded if in on-line
data state)
Description
when +CREG=1: given when <stat> value changes; given after NO CARRIER if
network lost when on-line
when +CREG=2: given when <stat> value changes and when the network cell
(<lac> and <cid>) of ME changes; given after NO CARRIER if network lost
when on-line; if V.80 is enabled
101/113
Advertisement
Table of Contents
