Ifc Dte-Dce Local Flow Control; Ilrr Dte-Dce Local Rate Reporting - Nokia D211 Developer's Manual

<parity> determines how the parity bit is generated and checked, if present.
0 odd
1 even
2 mark
3 space

6.3.12 +IFC DTE-DCE local flow control

Command
set
+IFC=<dce-by-dte>,<dte-by-dce>
read
+IFC?
test
+IFC=?
Optional (mandatory if V.42 or buffered mode implemented). V.25ter section 6.2.12.
Parameters:
<DCE_by_DTE> specifies the method to be used by the DTE to control the flow of received
data from the Nokia D211.
<DTE_by_DCE> specifies the method to be used by the Nokia D211 to control the flow of
transmitted data from the DTE.
0 no flow control
1 Software flow control (XON/XOFF)
2 Hardware flow control (CTS/RTS)
3 Software flow control (XON/XOFF), with flow control characters passed also to
the remote DCE

6.3.13 +ILRR DTE-DCE local rate reporting

Command
set
+ILRR=<n>
read
+ILRR?
test
+ILRR=?
Mandatory (for V-series data modems). V.25ter section 6.2.13. Controls presentation of
+ILRR intermediate result code.
Values for <n>:
0 local port rate reporting disabled
1 local port rate reporting enabled
Response
+IFC: <dce-by-dte>,<dte-by-dce>
+IFC: (0-3),(0-2)
Response Default
0
+ILRR: <n>
+ILRR: (0,1)
Default
2,2
43/113