Table of Contents
Advertisement
4.
GENERAL SOFTWARE SPECIFICATIONS
A very detailed description of the commands is beyond this document. The specifications can
be found from the referred documents that are needed for thorough understanding of the
capabilities of the Nokia D211 All ITU-T V.25ter /1/, ETSI GSM 07.07 /3/, ETSI GSM 07.05
/4/ and ETSI GSM 07.60 /16/ commands that are mandatory and those optional ones that
are applicable to the Nokia D211 are included in the command set. Also those 'de facto'
commands that are used widely among modems are supported. Note that V.25ter is a
combination of three TIA standards (TIA-602, TIA-615, IS-131). The Nokia D211 can be
utilised as an adapter for a Group 3 facsimile terminal-supporting facsimile Service Classes
1, 2 and 2.0. The supported facsimile AT commands are listed according to the standards
they are specified: Service Class 1 TIA-578-A /5/, Service Class 2.0 TIA-592 /6/ and Service
Class 2 TIA SP-2388 /7/. TIA SP-2388 is a draft of an oncoming standard, but yet it is
referred here as a public standard.
4.1 SUPPORTED OPERATING SYSTEMS
The Nokia D211 is compatible with a wide range of laptops and handheld devices, as long as
they include a type II or III PC card slot with sufficient power supply and run on one of the
following operating systems:
•
Drivers and software for Windowsä 98 SE, Me, 2000, and XP are included in the sales
package (check the Nokia Web site for software updates)
•
Drivers and software for Windowsä CE 3.0 (Pocket PC, Pocket PC 2002 and Handheld
PC 2000) will be available on the Nokia Web site (check the Nokia Web site for
compatibility with specific devices)
•
Drivers for Linux will be available on the Nokia Web site
Note: The Nokia D211 cannot be used via serial interface like the Nokia Card
Phone 2.0 can. The Nokia D211 needs at least one of the operating systems
listed above.
4.2 INSTALLATION SOFTWARE
The Nokia D211 can be installed and configured using several methods. This gives great
flexibility for corporate administrators.
4.2.1 Normal installation
Standard installation can be started from the product CD-ROM. The CD-ROM contains a
multimedia presentation and installation software for Windows 98 SE, Me, 2000 and XP in
20/113
Advertisement
Table of Contents
