Table of Contents
Advertisement
3.9 TYPE APPROVAL AND EMC TESTING
The following statements reflect the current understanding of Nokia on type approval and
electro-magnetic compatibility (EMC) testing. Please find out the testing status of the chosen
application with the appropriate authorities.
3.9.1 GSM
Using Nokia D211 as a terminal adapter (TA) to a GSM network for data transmission in
most host devices is covered by the type approval of the Nokia D211 if the interface between
the host and the Nokia D211 is as specified in this document.
3.9.2 WLAN
The Nokia D211 operates at 2.4 -2.4835 GHz. The use of the frequency band is not
harmonized throughout European Community or globally. Consult local authorities on the
regulations concerning the use of the Nokia D211.
Using the Nokia D211 as a terminal adapter for data transmission in most host devices is
covered by the type approval of the Nokia D211 if the interface between the host and the
Nokia D211 is as specified in this document. National deviations, however, may exist.
3.9.3 Electromagnetic compatibility (inside Europe)
For electromagnetic compatibility (EMC) the Nokia D211 is tested according to the standards
EN 301 489-7 /21/ and EN 301 489-17 /22/ as a 'Radio and ancillary equipment for fixed use
(base station equipment)'. The standards refer to the standard EN 301 489-1 /20/. Spurious
emission requirements for WLAN are specified in the standard EN 300 328-2 /18/, which
refers to the standard EN 300 328-1 /17/.
If the host interface is designed for the Nokia D211 only, the combination of the host and the
Nokia D211 has to fulfil the requirements of the standards EN 301 489-7, EN 301 489-17 and
EN 300 328-2. The combination of the host and the Nokia D211 has to fulfil all relevant
European directives.
Note: The Nokia D211 is tested against the requirements relating to residential,
commercial and light industrial environment. No vehicular or automotive
requirements are applied.
3.9.4 Electrical safety (inside Europe)
The Nokia D211 is tested for electrical safety according to the standard EN 60950 /23/. The
Nokia D211 is a Class III product, which means that the Nokia D211 has to be supplied from
safety extra-low voltage (SELV) circuits according to EN 60950.
19/113
Advertisement
Table of Contents
