General Setting - Marantz UD5005 User Manual

ENGLISH

General Setting

Settings for system, language, parental lock, network, etc. can be made.
System Setup
Set the following settings.
Screen saver settings
Power saving mode settings
HDMI control function settings
Initialize settings
Firmware update from the Internet
BD-LIVE Memory switching settings
Setting items
Screen Saver On : The screensaver function activates when stop or pause status
Sets the screensaver. continues for about three minutes. The screensaver function also activates
during playback of a CD, Super Audio CD or audio fi le when no operations
are performed for about three minutes.
Off : Does not use the screensaver.
Auto Power Mode On : This setting automatically sets the power to standby if any of the
This setting automatically following states continues for approximately 30 minutes.
sets the power to standby. Disc not loaded
Playback stopped
Stopped due to the resume function
Off : Does not use the auto power mode.
Power Saving Power Saving Standby : This is the lowest power consumption mode.
Sets to power saving mode During standby, operations are not accepted via HDMI control.
during standby. Normal Standby : During standby, operations are accepted via HDMI
control. Power consumption is slightly higher at this time.
HDMI Control On : Links with the device connected to HDMI.
Links the unit and a device Off : Disables the HDMI control function.
connected with an HDMI
cable that supports HDMI
For the HDMI control function to operate, it is necessary for the unit or
control.
HDMI-compatible TV connected to the unit to have an HDMI connection.
Refer to "HDMI control functions" (vpage 21) for more information on
HDMI control functions.
After the "HDMI Control" setting has been changed, always turn off the
power to the connected equipment and then turn it back on.
HDMI Power Off Control On : Turns the unit's power to standby through linkage to the TV.
Links the power of the unit Off : Does not turn the unit's power to standby through linkage to the TV.
and a device connected with
an HDMI cable that supports
HDMI control.
34
Remote control operation
buttons
Default settings are underlined.
Setting details
Displaying the menu
Cancel the menu
Setting items
Initialize Cancel : Does not initialize.
All settings including audio OK : Executes initialization.
mode and picture quality are
set to default settings.
Firmware Update Check for Update : Checks if a newer version of fi rmware exists. You
Updates the fi rmware of the can also check approximately how long it will take to complete an update.
unit via the Internet. If the fi rmware is already updated to the latest version, the fi rmware
updating operation starts after you press
When updating starts, the power indicator lights red and the GUI menu
screen shuts down.
While updating, a rough estimate of remaining time is indicated on the
display.
When updating is complete the power indicator lights green and the
normal status is resumed.
Update Notifi cation On : The message for updating is displayed on a television screen.
Displays the message for Off : The message for updating is not displayed on a television screen.
updating on a television
screen just after the power
is turned on.
BD Data Utility BD Data Information : The BD data used for BD-Live are initialized.
Initializes the BD data stored The space remaining in the memory being used is displayed.
in the built-in memory or FMT BD Data : Initializes the space for BD data being used for BD-Live.
external memory used for
BD-Live.
BD-Live Memory : Built-in memory or external memory is selected for
the BD-Live memory.
Move the cursor
Decision the setting
(Up/Down/Left/Right)
Setting details
ENTER
This operation deletes all data. When a USB memory device that
stores the data is inserted, never execute this operation.
Internal : The built-in memory is used.
External : The USB memory device inserted in the unit is used.
If the capacity of BD-Live is more than 1 GB, select the external
memory in advance (vpage 15).
Return to previous menu
.