Connections; Important Information; Connecting An Av Receiver - Marantz UD5005 User Manual

Connections

Important information

Connect this unit as follows before using. Make connections according to the equipment you are
connecting.
Some settings of this unit may be necessary depending on the connection method. Check each
connection item for more information.
Select the cables (sold separately) according to the components being connected.
NOTE
Do not plug in the power cord until all connections have been completed.
When making connections, also refer to the operating instructions of the other components being
connected.
Be sure to connect the left and right channels properly (left with left, right with right).
Do not bundle power cords together with connection cables. Doing so can result in noise.

Connecting an AV receiver

For connecting using an HDMI cable, see "Connect" (vpage 4). This section describes the connections
not using an HDMI cable.
Connecting to an AV receiver with an analog 2-channel audio
input terminal
This connection is recommended when the specifications of an AV receiver connected to the unit are
as follows:
Not supporting HDMI input
Not supporting digital audio(coaxial) input
Select the connector to use and connect the device.
Cables used for connections
Audio and Video cable
(White)
L
Audio and Video
(Red)
cable R
(Supplied)
(Yellow)
Video cable
(Green)
Component video
cable
(Blue)
(Sold separately)
(Red)
L
R
AV receiver
L L
R R
ENGLISH
9