Connecting devices with
remote control connectors
When you use this unit connected to a Marantz amplifier, this
unit receives operation signals sent from the amplifier and
operates accordingly.
Next, configure the "Connection" and "Setting".
Connection
Use the supplied remote connector cable to connect the
REMOTE CONTROL IN connector of this unit to REMOTE
CONTROL OUT connector of the amplifier.
Setting
Turn the EXTERNAL/INTERNAL switch on the unit to
"EXTERNAL".
This setting will disable remote sensor reception of this
0
unit.
To operate the unit, point the remote control at the remote
0
sensor of the amplifier.
To use this unit by itself without connecting an amplifier,
0
turn the switch to "INTERNAL".
This unit
Remote
connector
cable
Signal flow
(supplied)
Amplifier
SPEAKERS
SPEAKERS
IMPEDANCE : 4
IMPEDANCE : 4
16
16
IN
IN
OUT
OUT
REMOTE CONTROL
REMOTE CONTROL
IN
IN
OUT
OUT
F .C.B.S.
F .C.B.S.
Connecting the timer device
This unit can perform timer play when an amplifier and timer
device are connected to this unit.
("Timer Play" (v p. 24))
Connecting the power cord
After completing all the connections, insert the power plug
into the power outlet.
Set to
"EXTERNAL".
To household power outlet
(AC 230 V, 50/60 Hz)
STEREO
STEREO
BI-AMP
BI-AMP
AMP MODE
AMP MODE
ID
ID
AC IN
AC IN
This unit
Amplifier
To household power outlet
(AC 230 V, 50/60 Hz)
Timer device
Power cord (supplied)
ENGLISH
10