Marantz UD5005 User Manual page 13

ENGLISH
Connecting to an AV receiver with a digital audio input terminal
This connection is recommended when the specifications of an AV receiver connected to the unit are
as follows:
This connection enables faithfully playing a disc that supports 5.1-channel output.
Select the connector to use and connect the device.
Cables used for connections
Audio cable
Coaxial digital
cable
(Black)
(Sold separately)
Audio and Video cable
(White)
L
Audio and Video
cable (Red)
R
(Supplied)
(Yellow)
Video cables
(Green)
Component video
cable
(Blue)
(Sold separately)
(Red)
10
L
R
AV receiver
When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, this unit outputs
Dolby Digital or DTS bitstream from its digital audio output terminal.
NOTE
Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection.
When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection
(vpage 4).
Super Audio CD's DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear
PCM is output.
Do not output DTS audio signals to an AV receiver that does not support DTS. Playing back a BD/DVD
disc with recorded DTS content can generate noise and even damage your speakers.
Connecting an AV receiver
L L
R R