Table Of Contents; Introduction; Monitors; Unpacking - Philips LTC 2914/91 Installation Instructions Manual

CONTENTS
1 INTRODUCTION ....................................................5
1.1 Monitors ........................................................................5
1.2 Unpacking ......................................................................5
1.3 Accessories ......................................................................5
2 INSTALLATION........................................................8
2.1 Ventilation......................................................................8
2.2 Power ............................................................................8
2.3 Connecting Composite Video Signal
to the Monitor................................................................8
2.4 Connecting Y/C (S-video) Signal to the Monitor ..........8
2.5 Connecting Audio to the Monitor..................................8
3 OPERATION ............................................................8
3.1 Front Panel Controls ......................................................8
3.2 On-screen Display (OSD) Menu....................................9
4 SPECIFICATIONS ..................................................10
4.1 Electrical ......................................................................10
4.2 Mechanical ..................................................................11
4.3 Environmental..............................................................11
4.4 Agency Certifications....................................................11
5 TROUBLESHOOTING GUIDE..............................11
1

INTRODUCTION

1.1

Monitors

The LTC 2914/91 (14-inch/36 cm), LTC 2917/91 (17-inch/
44 cm), and LTC 2919/90 (19-inch/48 cm) monitors are
intended for display of PAL or NTSC standard color pictures in
CCTV systems. This family of monitors accepts two (2)
Composite Video inputs with loop-through BNC connectors
and one (1) Y/C loop-through input with two (2) 4-pin mini-
DIN connectors, located on the rear of the monitors.
The video input selection buttons (A, B, Y/C, and SEQ) are
located on the front of the monitor.
For applications that require audio, two (2) sets of audio phono
jack connectors are provided on the rear panel.
1.2

Unpacking

Read these instructions carefully.
Unpack carefully. Monitors are electronic equipment and
should be handled carefully. Check for the following items:
LTC 2914/91, LTC 2917/91, or LTC 2919/90 Color
Video Monitor.
Two (2) Power Cords: One (1) for 120 VAC, 60 Hz mains
power; one (1) for 230 VAC, 50 Hz mains power.
Installation Instructions
1.3 Accessories (Not Included)
LTC 9113/00 Rack Kit: For mounting one LTC 2914/91
monitor in a 19-inch standard EIA rack.
LTC 9117/00 Rack Kit: For mounting one LTC 2917/91
monitor in a 19-inch standard EIA rack.
LTC 9119/00 Rack Kit: For mounting one LTC 2919/90
monitor in a 19-inch standard EIA rack.
5