On-Screen Display (Osd) Menu - Philips LTC 2914/91 Installation Instructions Manual

(#2 down): Multifunction; First push – selects brightness
function for adjustment; In brightness adjust mode – decreases
brightness level; Within OSD menu – moves the cursor
downward.
(#2 left): Multifunction; First push – selects contrast
function for adjustment; In contrast adjust mode – decreases
contrast level; Within OSD menu – moves the cursor to the
left or decreases adjustment levels.
(#2 right): Multifunction; First push – selects contrast
function for adjustment; In contrast adjust mode – increases
contrast level; Within OSD menu – moves the cursor to the
right or increases adjustment levels.
A (#3): Selects the video input A to be displayed.
B (#4): Selects the video input B to be displayed.
Y/C (#5): Selects the video input Y/C (S-video) to be displayed.
SEQ (#6): Selects all three video inputs A, B, & Y/C (S-video)
to be displayed in sequence. Displaying duration is set using the
OSD menu (Dwell Time).
NOTE: All video inputs selected for sequence mode must be
connected prior to applying power to the monitor.
(#7): Press the switch to turn the monitor ON (the indicator
will illuminate). Press the switch again to turn the monitor OFF.
3.2

On-screen Display (OSD) Menu

Press the OSD push button (Fig 1, Item 1) to obtain the
following menu options:
Tint: Adjusts color level; for best results, adjust until skin color
is natural. See the OSD Tint menu configuration below.
NOTE: Applicable to NTSC only; not available in PAL format.
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
DWELL TIME
VOLUME
UNDER SCAN
EXIT
EXIT
TINT
50%
Color: Adjusts the overall color intensity of the screen display.
See the OSD Color menu configuration below.
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
DWELL TIME
VOLUME
UNDER SCAN
EXIT
EXIT
Default: Enables factory default settings for brightness,
contrast, tint, color, title enable, dwell time, underscan, and
volume level. See the OSD Default menu configuration below.
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
DWELL TIME
VOLUME
UNDER SCAN
EXIT
EXIT
Language: Selects the language for the OSD text; available in
English, Chinese, French, German, Spanish, Italian, and
Dutch. See the OSD Language menu configuration below.
TINT
COLOR
DEFAULT
LANGUAGE
CHANNEL TITLE
DWELL TIME
VOLUME
UNDER SCAN
EXIT
EXIT
9
COLOR
50%
TINT
COLOR
DEFAULT OK
LANGUAGE
CHANNEL TITLE
DWELL TIME
VOLUME
UNDER SCAN
EXIT
EXIT
LANGUAGE
ENGLISH
[CHINESE]
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
NEDERLANDS