Related Manuals for Philips LTC 2810/90
Summary of Contents for Philips LTC 2810/90
- Page 1 Philips Communication & Security Systems LTC 2810/90 Color Video Monitor...
- Page 2 Instructions for Use...1.1 Mode d’emploi ...2.1 Bedienungsanleitung...3.1 Instrucciones de maneja ...4.1 Gebruiksaanwijzing ...5.1 Istruzioni per l’uso ...6.1...
-
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. -
Page 5: Safety Precautions
SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This label may appear on the bottom of the unit due to space limitations. The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”... - Page 6 CONTENTS INTRODUCTION ...1.3 1.1 Unpacking ...1.3 1.2 Monitor ...1.3 1.3 Power...1.3 CONTROLS AND FEATURES ...1.3 2.1 Front Panel ...1.3 2.2 Rear Panel ...1.4 OPERATION ...1.5 3.1 Basic Operation ...1.5 3.2 Picture adjustment ...1.5 BASIC CONNECTION EXAMPLE ...1.5...
-
Page 7: Controls And Features
INTRODUCTION Unpacking Check for the following items: • verify the model number • power cord • Installation Instructions Monitor The LTC 2810/90 is a multi-standard color monitor housed in a metal cabinet for rugged reliability. It has a 10-inch tube (viewable picture area 23 cm (9")). - Page 8 Rear Panel Video A terminals [VIDEO A IN/OUT] Video signal input (IN) and output (OUT) terminals The output terminal is bridge-connected (auto termination). : Video signal input terminal OUT : Bridge-connected video signal output terminal NOTE: For corresponding audio signals, use the AUDIO A terminals Video B terminals [VIDEO B IN/OUT] Video signal input (IN) and output (OUT) terminals.
-
Page 9: Operation
OPERATION Basic operation 1. Press the Power switch to turn on the power. When the power is ON, the Video Selector indicator is lit. When the power is OFF, the Video Selector indicator is unlit. 2. Press (toggle) the Video button (A or B) to choose the input. Button Terminals on the rear panel Video signal input...