Components; Other Items You May Need; How The System Works; Key Definitions - Petsafe Remote Trainer PDBDT-305 Operating And Training Manual

Components

PDLDT-305 Receiver Collar
Remote
Transmitter 9-Volt Battery

Other Items You May Need

• Small Phillips screwdriver
• Pliers
• Scissors
• Lighter
• Non-metallic collar and 10-foot leash

How the System Works

The Remote Trainer assists you in controlling your pet without a leash in a range of up to 100
yards. At the push of a button, your remote sends a signal activating your dog's Receiver Collar. He
receives a safe but annoying stimulation. He'll quickly learn the association between his behavior
and your correction; in no time, you'll have a better-behaved pet. The PetSafe
been proven safe, comfortable, and effective for both small and large dog breeds.
Using the Remote Trainer consistently and correctly, any basic
obedience commands can be taught and many misbehaviors that your
pet exhibits can be corrected.
Important: The Remote Trainer has a range up to 100 yards.
Depending on the way you hold the Remote Transmitter, the range
may vary. Hold the Remote Transmitter in a horizontal position
away from your body to achieve optimum range. Terrain, weather,
vegetation, transmission from other radio devices, and other
factors will affect the range of your Remote Trainer.
4 US Customer Care Center 1-800-732-2677
PDBDT-305 Receiver
3-volt
Test Light Lithium
Batteries
Operating and
(CR2032)
Training Guide
Remote Trainers have
®

Key Definitions

Remote Transmitter: Transmits the signal to the
Receiver Collar.
Arrow: Indicates the level of stimulation that will be
delivered to your pet.
Intensity Level Dial: Provides a choice of 10 different
levels of stimulation to enable you to match the level to
your pet's temperament.
Transmitter Indicator Light: Indicates when any button
on the Remote Transmitter is pressed.
Tone Only Button: Sends an audible tone to your pet.
There is no stimulation associated with this button.
Stimulation Only Button: Delivers stimulation to your
pet through the Contact Points. When this button is
held down continuously for 8 seconds, the Remote
Transmitter will "time-out", and you must release and
press the button again before any additional stimulation
can be delivered to your pet.
Receiver Collar: Receives the signal from the Remote
Transmitter.
Contact Points: Deliver stimulation to your pet.
Receiver Indicator Light: Indicates when the Receiver
Collar has been turned on or off.
Antenna: Receives the signal that is emitted from the
Remote Transmitter.
Receiver Collar PDLDT-305
Receiver
Indicator
ON/OFF
Contact
Light
Antenna
Button
Points
Remote Transmitter
Arrow
Intensity
Level Dial
Transmitter
Indicator Light
Tone Only Button
Stimulation
Only Button
Receiver Collar PDBDT-305
Antenna
Contact
Receiver
Points
Indicator
Light
ON/OFF
Button
Battery
Lid
www.petsafe.net
Battery
Lid
5