Page 1
Elite Remote Spray Trainer operating and training guide Model number Pdt00-11234 Please read this entire guide before beginning...
Page 2
: Do not puncture. Contact of liquid propellant with skin may cause frostbite. : Do not ingest. In case of accident, seek medical care. If swallowed, call a poison control center immediately. The PetSafe Elite Remote Spray Trainer is not a toy. Keep it away from the reach of children. ®...
Page 3
If so, you may relax some of these precautions. It is important to continue daily checks of the neck area. If redness or sores are found, discontinue use until the skin has fully healed. The PetSafe Elite Remote Spray Trainer must be used only on healthy dogs. We recommend ®...
Our products and training tools enhance the relationship between pets and their owners. If you have any questions about our products or training your pet, please visit our website at www.petsafe.net or contact our Customer Care Center at 1-800-732-2677.
: Scissors : Non-metallic collar and 10-foot leash for training How the System Works The PetSafe Elite Remote Spray Trainer has been proven safe, comfortable, and effective ® for pets of any size. This system assists you in controlling your pet without a leash in a range up to 400 yards.
Key Definitions Handheld Remote: Transmits the signal to the Receiver Collar. It is waterproof. Digital Display Digital Display Level of Spray: Shows Dog 1 or Dog 2 level of spray (Low-1 to Battery High-15). Also indicates +2 Boost. Dog 1 Dog 2 Indicator Dog 1: The active collar symbol will display to indicate Dog 1.
Page 7
Charging Jacks: For connecting the charger. Although the Button Handheld Remote and Receiver Collar are waterproof without the charger covers, keep the covers in place when not charging to Two Color LED keep debris out of the openings. Charging Jack www.petsafe.net...
Operating Guide Step 1 Prepare the Handheld Remote Charge the Handheld Remote 1. Lift the rubber cover protecting the Handheld Remote Charging Jack. 2. Connect one of the charger connectors to the Handheld Remote Charging Jack. 3. Plug the charger into a standard wall outlet. 4.
3. Plug the charger into a standard wall outlet. 4. Charge the Receiver Collar until the Green Indicator Light Charger connector comes on and is solid. Recharges take only 4-5 hours. placed in the Receiver 5. When charging is completed replace the rubber cover. Collar Charging Jack www.petsafe.net...
Page 10
To turn the Receiver Collar On 1. Press and hold the On/Off Button until the Green LED comes on and the Receiver Collar beeps low to high. 2. Release the On/Off Button. The Green LED will flash once every 5 seconds until the Receiver Collar is turned off.
3. Place the Receiver Collar on your dog’s neck close to the ears. Center the Receiver underneath your dog’s neck, touching the skin (3B). Make sure the PetSafe logo on the front of the unit is upright. Note: It is ®...
113°F. Refill canisters are available. Choose from citronella or unscented spray. Contact the Customer Care Center or visit our web site at www.petsafe.net to locate a retailer near you. Customer Care Center 1-800-732-2677...
4. Press the +2 Boost to lock the correction level for Dog 1. 5. Set Dog 2 Spray level to the desired level using the Spray Up and Down buttons. Charging Jack (with cover) 6. Press the +2 Boost to lock the correction level for Dog 2. www.petsafe.net...
Dog 2 Receiver Collar 1. With the Receiver Collar off your pet, turn the Receiver Collar off. 2. Press and hold the On/Off button for 5 seconds. 3. The Receiver Collar will beep and the LED will flash. 4. On the Handheld Remote, press the Upper Right or Lower Right button. 5.
2. Hold the leash and the Handheld Remote in one hand. Keep your other hand free to guide your pet into a “Sit” position. 3. Press and hold the Spray Button. 4. Immediately give the “Sit” command while continuing to hold the Spray Button. www.petsafe.net...
Page 16
5. Release the Spray Button as soon as your pet is in position, and praise him. 6. Release your pet from the “Sit” command and play. 7. Repeat Steps 2 through 6. Note: If your pet breaks the “Sit” command, repeat steps 3 through 6. Keep your pet close to you while teaching the “Sit”...
Page 17
6. Immediately release the Spray Button as soon as your pet returns to the area, and praise him enthusiastically. 7. Once your pet has settled for a few seconds, release him and play calmly. 8. Repeat steps 1 through 5 several times. www.petsafe.net...
Eliminating Unwanted Behavior Jumping Up Pets typically jump up to get attention. If you do not want your pet to jump on you, then friends or members of the family should not encourage this behavior. That means every time your pet jumps on someone, he should be reprimanded or redirected to an alternate and acceptable behavior, for which he can receive praise.
4. Do not say anything, as you want your pet to associate the spray with his behavior, not you. 5. If your pet does not respond to the Spray Stimulation, increase the Spray Level by 1 and repeat the process. 6. Repeat this process in several different locations with different temptations. www.petsafe.net...
Frequently Asked Questions : Your pet should be at least 6 months old and able to How old does my pet have to be before using the PetSafe recognize basic obedience commands such as “Sit” ® Elite Remote Spray Trainer? or “Stay”.
Product. Buyer assumes all risks and liability from the use of this Product. 5. Modification of Terms and Conditions Radio Systems Corporation reserves the right to change the terms, conditions and notices under ® which this Product is offered. www.petsafe.net...
One Year Non-Transferrable Limited Warranty This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can be found at www.petsafe.net and/or are available by contacting your local Customer Care Centre.
Page 23
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. www.petsafe.net...
Page 25
DO NOT PRINT THIS PAGE RSC Part #: 400-1559-1 Description: MANUAL PDT00-11234 ROHS Created by: Material: 100gsm Wood Free Initial Creation Date: 10-25-13 Paper Approved by: LTAYLOR Printing: Black Date Approved: 12-3-13 Finishing: Die Cut, Fold, 2 Program used: INDESIGN CS6...