Subscribe to Our Youtube Channel
Related Manuals for Petsafe PDT00-13623
Summary of Contents for Petsafe PDT00-13623
-
Page 1: Operating And Training Guide
Elite Remote Trainers operating and training guide Little Dog Model Number PDT00-13623 Big Dog Model Number PDT00-13625 Little Dog ADD-A-DOG Big Dog ADD-A-DOG ® ® PAC00-13631 PAC00-13632 PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING... - Page 2 Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
- Page 3 It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed. PetSafe ® Remote Trainers must be used only on healthy dogs. We recommend that you take your dog to a veterinarian before using the collar if he is not in good health.
-
Page 4: Table Of Contents
To get the most protection out of your warranty, please register your product within 30 days at www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. -
Page 5: Components
Compliance ........................ 27 Perchlorate Battery ..................... 28 Components Test Light Tool Little Dog Receiver Collar Charging Adapter Remote Big Dog Transmitter Receiver Collar Operating and Wrist Strap Training Guide Other Items You May Need • Scissors • Lighter • Non-metallic collar and 10-foot leash www.petsafe.net... -
Page 6: How The System Works
1000 yards. At the push of a button, your remote sends a signal activating your dog’s Receiver Collar. He receives a safe but annoying stimulation. He’ll quickly learn the association between his behavior and your correction; in no time, you’ll have a better-behaved pet. The PetSafe ®... - Page 7 12 seconds or more, the Remote Transmitter will “time-out.” The button will need to be released and pressed again before additional Stimulation can be delivered. The Elite Remote Training systems will never Wrist Strap exceed a Stimulation Level above High-15. Clip www.petsafe.net...
- Page 8 Receiver Collar: Delivers stimulation or tone on a signal from the Remote Transmitter. All Elite Trainers are waterproof. On/Off Button: Momentarily pressing and holding this button turns the Receiver Collar on and off. Contact Points: The contacts through which the Receiver Collar delivers Stimulation. Receiver Indicator Light: Indicates when the Receiver Collar has been turned on or off and also serves as a low-battery indicator.
-
Page 9: Operating Guide
Dog 1/ Dog 2 The symbol displayed is the active dog receiver collar. See Two Dog System on page 14. Tone or When pressing Tone or Stimulation the Dog 1 or Stimulation Dog 2 symbol will appear in bold or emphasized. www.petsafe.net... - Page 10 Tone Only When pressing Tone Only for Dog 1 or Dog 2 the number zero appears. Battery The battery indicator provides constant Indicator awareness of your battery’s power level. See Battery Indicator for more detailed information. Note: Factory preset is for Dog 1 mode, you will not see the Dog 2 symbol unless the unit is programmed for Dog 2 (see Two Dog System on page 14).
-
Page 11: Prepare The Receiver Collar
Upper Left button is pressed. If it does not, see “To Pair the Remote Transmitter and the Receiver Collar”. Note: To extend the life of the battery, turn the Receiver Collar off when it is not in use. Little Dog Receiver Collar Big Dog Receiver Collar On/Off Button (On bottom of receiver) On/Off Button www.petsafe.net... - Page 12 This is normal. If your operating time drops to half of the original life, contact the Customer Care Center. • When a battery needs replacement, contact our Customer Care Center or visit our website at www.petsafe.net. Please do not open the Receiver Collar or Remote Transmitter. 1-800-732-2677...
-
Page 13: Fit The Receiver Collar
(cut at groove for Big Dog Collar). c. For the Little Dog Receiver Collar: Before placing the Little Dog Receiver Collar back on your pet, seal the edge of the cut collar by applying a flame along the frayed edge. www.petsafe.net... -
Page 14: Two Dog System
Note: If you wish to add another receiver collar to the training system, ADD-A-DOG ® collars are available where you bought your training system, through our website at www.petsafe.net or through our Customer Care Center. PAC00-13631—Little Dog ADD-A-DOG or PAC00-13632—Big Dog ADD-A-DOG ®... - Page 15 Dog 1 symbol along with the selected correction level. To view the currently selected correction level for Dog 2, press the +2 Boost button twice and the display will show the Dog 2 symbol along with the selected correction level. www.petsafe.net...
-
Page 16: To Pair Dog 1 Receiver Collar And The Remote Transmitter
To Remove Dog 2 from the Remote Transmitter Press and hold the +2 Boost button for 5 seconds. Press the Right Lower button until the “1d” symbol appears on the Digital Display. Press +2 Boost to exit the menu. To Pair Dog 1 Receiver Collar and the Step Remote Transmitter If your Receiver Collar does not beep when the Upper Left button of the Remote Transmitter... -
Page 17: Training Guide
Find the Best Stimulation Level for Your Pet Important: Always start at the lowest level and work your way up. The Elite Remote Trainers have 15 different Stimulation Levels. This allows you to choose the Stimulation that is best for your pet. www.petsafe.net... -
Page 18: Boost
“Test Light Instructions” section. If after completing all of these steps your dog still does not indicate he is feeling the Stimulation, please contact Customer Care Center or visit our website at www.petsafe.net. +2 Boost A press of this button sends a signal to the collar to issue a correction that is 2 levels higher than the currently selected level. -
Page 19: Teaching Basic Obedience
3. Wait for your pet to walk away from you. Using the Recognition Level for your pet, press and hold the Stimulation button on your Remote Transmitter. 4. Immediately give the command “Come” while continuing to hold the Stimulation button. www.petsafe.net... - Page 20 5. Using the leash, gently guide your pet toward you until he begins to come in your direction. 6. Immediately release the Stimulation button as soon as your pet steps towards you, and praise him enthusiastically. 7. Quickly move backwards as your pet begins to come back to you, praising him the entire time.
-
Page 21: Eliminating Unwanted Behavior
5. If your pet ignores the stimulation, increase the Intensity Level by 1. 6. Continue to watch your pet, as he may choose another area to dig. 7. Do not allow your pet in the yard unsupervised until he has completely stopped digging. www.petsafe.net... - Page 22 Chasing Chasing is an instinctive behavior stimulated by moving objects. Some dogs have a particularly strong desire to chase that can put them in harm’s way and leave you helpless. Never allow your dog off the leash or out of a contained area until he has learned the “Come” command, regardless of the distraction.
-
Page 23: Trash Raiding
4. Do not say anything, as you want your pet to associate the stimulation with his behavior, not you. 5. If your pet does not respond to the stimulation, increase the Intensity Level by 1 and repeat the process. 6. Repeat this process in several different locations with different temptations. www.petsafe.net... -
Page 24: Frequently Asked Questions
ADD-A- DOG Receiver Collars work with the Elite Remote Training systems. • We do not recommend any of our products to be used Can I use the PetSafe ® Elite Remote Trainers on aggressive on aggressive pets. We recommend you contact your... -
Page 25: Troubleshooting
5. Turn the Receiver Collar off. Save the Test Light for future testing. Note: If the Test Light does not flash, recharge the battery and re-test. If Test Light still does not flash, contact the Customer Care Center or visit our website at www.petsafe.net. www.petsafe.net... -
Page 26: Accessories
Monday - Friday 10:30 AM - 7 PM This product has the benefit of a limited manufacturer’s warranty. Details of the warranty applicable to this product and its terms can be found at www.petsafe.net and/or are available by sending a stamped addressed envelope to PetSafe Ltd. -
Page 27: Compliance
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. www.petsafe.net... -
Page 28: Perchlorate Battery
Perchlorate Battery Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Radio Systems Corporation ® 10427 PetSafe Way Knoxville, TN 37932 1-800-732-2677 www.petsafe.net 400-1461 ©2008 Radio Systems Corporation...
Need help?
Do you have a question about the PDT00-13623 and is the answer not in the manual?
Questions and answers