Telephone Settings; Analog Corded 1-Line/2-Line Petite Phone - A2211/A2221; Analog Corded 2-Line Trimstyle Phone - A2321 - VTech A2211 User Manual

Telephone settings

Analog Corded 1-line/2-line Petite Phone - A2211/A2221

Analog Corded 2-line Trimstyle Phone - A2321

Default settings are indicated by asterisks (*).
Setting
Handset earpiece volume
(for models A2211 and A2221 only)
Handset earpiece volume
(for model A2321 only)
Ringer volume
Ringer tone
Flash
(for model A2221 only)
Voicemail voltage detection
Ringer tone
There are 3 ringer tone options. For 2-line models A2221 and A2321, changing the ringer tone of either LINE 1 or LINE 2 applies to
both phone lines.
To change the ringer tone:
1. Turn the telephone base over with the bottom side facing up. Remove the mounting bracket if it is in desktop position. To remove
the mounting bracket, firmly push both tabs downward and pull up until they release from the grooves.
2. Slide the ringer tone switch to select the desired detented position using a narrow object such as a standard screwdriver.
3. Install the mounting bracket accordingly.
Flash
For 2-line model A2221, there are 3 flash duration options that can be programmed.
To change the flash duration:
Remove the faceplate and overlay if they are on the telephone base. Lift the handset, then press the recessed PROGRAM key.
1.
The MUTE key flashes when in administrator mode.
2. Press FLASH and you hear 3 beeps. Then press a dialing key, 1 (100ms), 2 (300ms) or 3 (600ms), to select the desired flash
duration. Press the recessed PROGRAM key again. You hear 3 rising beeps as confirmation.
Options
1, 2*, 3, 4
1, 2, 3*, 4, 5
Low, Medium*, High
Tone 1*, Tone 2, Tone 3
1 (100ms), 2 (300ms), 3* (600ms)
Disable voicemail voltage detection,
Periodic low voltage pulse detection method,
Steady high voltage and periodic high voltage
pulse detection method
7
Adjustable by:
User and administrator
User and administrator
User and administrator
Administrator only
Administrator only
Administrator only