Advertisement
Quick Links
Advertisement
Related Manuals for Dogtra Remote Controlled Dog Training Collars
Summary of Contents for Dogtra Remote Controlled Dog Training Collars
- Page 1 Remote Controlled Dog Training Collars Code Setting Guide www.dogtra.com...
- Page 2 Code Setting Guide for Your Dogtra Transmitter/Receiver One-Dog Once you have received the transmitter sent to you by the Dogtra facility, you need to code set your unit to control your receiver with the new transmitter (or transmitter with the new receiver).
- Page 3 Two-Dog Once you have received the transmitter sent to you by the Dogtra facility, you need to code set your unit to control your receiver with the new transmitter (or transmitter with the new receiver). The code setting method is as follows: 1) Turn the transmitter on by pushing the ON/OFF Button located on the right side.
- Page 4 3) Place the red dot on the back of the transmitter to the red dot on the receiver/collar. Hold the two red dots together for about 5 seconds or more. Release them when the green LED blinks rapidly on the receiver/collar. 4) Within 5 seconds after taking the two Together Together...
-
Page 5: Warranty And Repair Information
Dogtra DOES NOT replace defective units or provide refunds for products purchased from us after 30 days from the date of purchase. Dogtra DOES NOT cover the cost of shipping outside of the Continental United States. Issues of replacement and refunds on units purchased less than 30 days from an authorized dealer must be addressed to the dealer directly. - Page 6 The removal of serial numbers from any Dogtra products will void the warranty. Dogtra reserves the right to retain and discard any parts or accessories that have been found damaged upon replacement and repair.