Mini-Gbic Combo Port; Cabling - B&B Electronics Elinx EIRP410-2SFP-T Manual

8 ports 10/100 poe with 2 combo 10/100/1000 or 100/1000 sfp ports unmanaged din rail ethernet switch

Hide thumbs Also See for Elinx EIRP410-2SFP-T:

Table of Contents

2 Mini-GBIC combo port

2 auto-detect combo Giga ports — RF45 or fiber. The gigabit Ethernet ports are shared with the mini-GBIC ports. RJ45

UTP (Gigabit Ethernet) ports can operate in half/full-duplex modes and work at speeds of 10/100/1000Mbps that support

auto-sensing technology to enable each port to detect the connecting speed. The mini-GBIC port is a socket for a mini-

GBIC (SFP) fiber transceiver.

•

Use four twisted-pair, Category 5e or above cabling for RJ-45 port connection. The cable between the switch and

the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.

•

Use the mini-GBIC ports to uplink to another switch by inserting the mini-GBIC (SFP) transceiver.

To connect the transceiver and LC cable, please follow the steps shown below:

First, insert the transceiver into the SFP module. Notice that the triangle mark is the bottom of the module.

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com

Figure 2.8: Transceiver to the SFP module

Manual Documentation Number: EIRP410-2SFP-T-0912m

Table of Contents