Download Print this page
B&B Electronics Elinx EIR608 Series Quick Start Manual

B&B Electronics Elinx EIR608 Series Quick Start Manual

B&b electronics elinx managed ethernet switch quick start guide

Advertisement

Quick Links

Quick Start Guide
Elinx Managed Ethernet Switch
EIR608 Series
1
Items Included
Ethernet Switch
o
Console Cable (RS-232 RJ-45 to DB-9)
o
CD with Support Manual
o
This Quick Start Guide
o
Panel Mount Bracket
o
2
Default Settings
IP Address: 192.168.16.1
o
Subnet Mask: 255.255.2555.0
o
Gateway: 192.168.16.254
o
Username: root Password: root
o
3
LED Chart
LED
Status
Green
The Switch is powered on
PWR
Off
The Switch is powered off
The Switch is the master of a redundant
Green
ring (X-Ring)
R.M
The Switch is not the master of a
Off
redundant ring.
Green
Power Source 1 is available
PWR1
Off
Power Source 1 is unavailable
Green
Power Source 2 is available
PWR2
Off
Power source 2 is unavailable
Green
SFP Port is linked
LINK/ACT
Blinking
Data is being transmitted or received
(P7/P8 SFP)
Off
Not connected to the network
Top
Green
Connected to the network
Top
Blinking
Transmitting or receiving
P1-8
Bottom
Off
Not connected or operating at 10/100
Bottom
Green
Operating at 1000M
Record the switch's MAC Address. The
o
4

Hardware Installation

MAC Address is printed on the product label. Provide
the MAC Address to your Network Administrator.
The Network Administrator should provide an IP
Address, Subnet Mask, and Gateway.
Select a mounting location and install with the attached
o
DIN rail clip or included panel mount kit.
Connect power to the switch
o
12 to 48 VDC
o
Redundant DC input is available with fault
o
contacts.
NOTE: The installation of an SFP Module disables
the associated RJ-45 Port.
815-433-5100 Fax 433-5104
+353 91 792444 Fax +353 91 792445 www.bb-europe.com orders@bb-europe.com support@bb-europe.com
5
These instructions are for Web based management.
o
Meaning
Refer to the User's Manual for instructions concerning
console management.
Connect a stand alone PC to a port on the switch.
o
Change the PC's network IP Address to allow it to
connect to the switch (ex: 192.168.16.2). Use the
default subnet mask and gateway.
Launch the PC's web browser and navigate to the
o
switch by typing the switch's IP address in the browser
address window.
Navigate the web page by expanding the folders on the
o
left side of the web page.
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
www.bb-elec.com
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
EIR608 Series-5107qsg
Log into the Switch
orders@bb-elec.com
support@bb-elec.com

Advertisement

loading

Summary of Contents for B&B Electronics Elinx EIR608 Series

  • Page 1: Hardware Installation

    These instructions are for Web based management. Refer to the User’s Manual for instructions concerning console management. Connect a stand alone PC to a port on the switch. Change the PC’s network IP Address to allow it to connect to the switch (ex: 192.168.16.2). Use the default subnet mask and gateway.
  • Page 2: User Name And Password

    NOTE: The User Manual contains instructions for assigning the IP Address from a DHCP Server and to allow the switch to act as a DHCP Server. User Name and Password This step should be accomplished by the Network Administrator.