Aaeon PCM-4894 User Manual page 61

These drivers are designed to work with Microsoft Windows Version
3.1. You should install these drivers through Windows.
1. Install Windows as you normally would for a VGA display. Run
Windows to make sure that it is working correctly.
2. Place the Supporting CD-ROM into your CD-ROM drive. In
Windows Program Manager, choose File from the Options Menu.
Then from the pull-down menu, choose Run. At the Command Line
prompt, type.
cd-rom: \CD ROM\model name\driver\vga driver\win31\setup.exe
Press the <ENTER> key or click OK to begin the installation.
"cd-rom:": the drive letter of your CD-ROM drive
"model name": the model number of your product
At this point the setup program locates the directory where Windows
is installed. For proper operation, the drivers must be installed in the
Windows subdirectory.
3. Press <ENTER> to complete the installation. Once completed, you
can find the icon Chips CPL under the Control Panel. The icon
allows you to select and load the installed drivers.
To change display drivers from Windows, select the Windows Setup
icon from the Main window. You will be shown the current setup
configuration. Select Change System Settings from the Option menu.
Click on the arrow at the end of the Display line. You will be shown a
list of display drivers. Click on the driver you want to select it. Then
click on the OK button. Follow the directions to complete the setup.
Chapter 4 Flat Panel/CRT Controller 55