Aaeon PCM-4894 User Manual page 60

These drivers are designed to work with Microsoft Windows. You just
install these drivers through the Windows operating system.
1. Install Windows 95 as you normally would for a VGA display. Click
the Start button, go to Settings and click on Control Panel.
Choose the Display icon and double click on the icon. In the
Display Properties window, click on the Settings tab. Then click
on Change Display Type. In the Change Display Type window,
click on the Change button under Adapter Type. This will bring up
the Select Device window.
2. Place the Windows 95 Display Driver Diskette in drive A. In the
Select Device window, click on Have Disk, Press <ENTER> and
the name of the Chips and Technologies, Inc. Video Controller
driver will appear highlighted in the Models list box. Select Chips
and Tech. 65550 PCI (new) and Click OK to install the selected
driver. Click OK to install the selected driver.
3. Once the installation is complete, the Change Display Type
window will reappear. Click on Close to close the window. Then
the Display Properties window will reappear. Click on Apply.
Restart the system for the new settings to take effect.
54 PCM-4894 User Manual