Aaeon PCM-4894 User Manual page 51

Standby Mode
This sets the period of system inactivity after which the system
goes into Standby mode, the intermediate power saving state.
The settings range from 10 seconds to 1 hour and can be set
manually when power management is in User Define mode. The
default setting is Disabled. When the system goes into power
saving mode, power management will skip to the next mode in the
sequence if this is disabled.
Suspend Mode
This sets the period of system inactivity after which the system
goes into Suspend mode, the maximum power saving state. The
settings range from 10 seconds to 1 hour and can be set manually
when power management is in User Define mode. The default
setting is Disabled. When the system goes into power saving
mode, power management will skip to the next mode in the
sequence if this is disabled.
Chapter 3 Award BIOS Setup 45