Activating The Dsp Modes - JVC RX-DP9VBK Instructions Manual

ALL Channel Stereo mode (ALL CH STEREO)
This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers. This mode cannot be used
without connecting the surround speakers.
• The CENTER CHANNEL submenu settings and the DSP
PARAMETER submenu settings cannot be applied to All Channel
Stereo mode. (You cannot adjust them for this mode.)
• If headphones are connected or if the front speakers are
deactivated, "ALL CH STEREO" cannot be selected (see
"HEADPHONE mode" below).
Stereo Film and Monaural Film modes
In order to reproduce a more acoustic sound field in your listening
room while viewing stereo sound or monaural sound video software
(analog and 2-channel digital signals), you can use these modes.
The surround effect will be added, and the sound localization of
actor's words will be improved.
STEREO FILM : To play back stereo video software
MONO FILM : To play back monaural video software
When "STEREO FILM" or "MONO FILM" is used, sounds come
out of all the connected (and activated) speakers.
3D THEATER
Only using the front speakers, this mode gives you such a true and
clear surround effect only as is reproduced through the Dolby
Surround decoder, which is widely used to reproduce sounds with a
feeling of movement like those experienced in movie theaters.
• When "3D THEATER" is used, the DSP and 3D-PHONIC
indicators light up. The PRO LOGIC indicator also lights up when
2-channel software is played back. (Dolby Pro Logic decoder is
activated.)
• If the center speaker is connected (and activated):
Sounds created by the built-in DSP (Digital Signal Processor)
come out of the center speaker to localize the sounds. So, you can
feel as if actors on the screen actually speak in your room.
• If headphones are connected, "3D HEADPHONE" will be
activated. (See "3D HEADPHONE Mode" on page 40.)
HEADPHONE Mode
You can also enjoy the DSP effect (except All Channel Stereo
mode) through the headphones.
By pressing DSP MODE when the headphones are connected,
HEADPHONE mode is activated without respect to the type of
software played back.
The DSP and HEADPHONE indicators also light up.

Activating the DSP Modes

Perform the basic settings and adjustments using the Setup and
Adjustment Menus first (see pages 26 to 38).
Activating one of the DSP modes for a source automatically
recalls the memorized settings and adjustments done on the
above menus.
IMPORTANT:
• When using the remote control:
Check the indication shown on the remote's display when you press
a button—this indicates the remote control operation mode for a
while (10 or 5 seconds).
Ex. When you press DSP MODE.
• When using the unit:
Press DOOR DOWN to use the buttons inside the front door.
DOOR
DOWN
To close the front door, press DOOR UP.
1. Select and play any sound source.
2. Press DSP MODE repeatedly until the DSP mode
you want appears on the display.
DSP MODE
On the unit
(inside the front door)
The DSP indicator also lights up on the display.
• Each time you press the button, the DSP modes change as
follows:
= =
LARGE HALL 1 LARGE HALL 2
= =
OPERA HOUSE CHURCH
= =
DANCE CLUB PAVILION
= =
LARGE THEATER
= =
STEREO FILM* MONO FILM*
=
SURROUND OFF (DSP off)
*
When multichannel signals come in, you cannot select
"STEREO FILM" and "MONO FILM."
STANDBY ON
TV/CATV/DBS VCR 1
STANDBY/ON STANDBY/ON
STA ND
BY
STA
ND
BY /ON
CC
CO
NV ER
TE
R
I G D
I T A
S U L
R R O U
N D
D I
G T I
A L
PH
ON
ES
SP EA
KE RS
1
SP
EA KE INP UT
RS MO DE R X
2 -D
INP SU RR P 9V
UT ATT ON / OF OU ND
F
ON HTX DS P MO
/ OF F DE
LIN E DIR SO SEL
EC UN EC D
T TOR
AD
SEL RE EC C JUS T
TOR ME NU DIM
ME
SE TU DO R MA ST
P ME WN ER
NU VO
LU ME
LEF T UP
DO OR
RIG SE UP
HT T
EX IT
DO
OR
DO WN
S-V
IDE
O
VID EO
VID EO
L
AU DIO
R
DSP
MODE
On the remote control
=
RECITAL HALL
=
LIVE CLUB
=
ALL CH STEREO*
SMALL THEATER
=
3D THEATER
= (Back to the beginning)
Continued on the next page.
44