Where to Go From Here
AP300 LED Descriptions
LED
Function
off—no power
Power
green—presence of power
off—no power
green—booting stage 1
blinking green and off—booting stage 2
blinking green and white—discovering the controller
Status
blinking green and blue—downloading a configuration from the
controller
blinking blue and off—AP is online and enabled, working state
blinking red and yellow—failure; consult controller for alarm state
off—no power or no link
green—link status OK
LAN
green/blinking—activity (at any speed)
red—auto negotiation failure
off—no radio present
green—radio enabled
Radio 1
green blinking—data activity
Radio 2
yellow—disabled or in scanning mode
red—failure
Where to Go From Here
Now that the AP300 is installed, go to the Meru System Director Getting Started Guide for instructions
on initializing the hardware. Return to this chapter to check the status of the LEDs once the WLAN is
operational.
22
Meru Access Point Installation Guide
(at any speed)
© 2009 Meru Networks, Inc.