Specifications - JVC RX-DP10VBK Instructions Manual

Specifications

Amplifier
Output Power
At Stereo operation:
At Surround operation:
Audio
Audio Input Sensitivity/Impedance (1 kHz):
CD, CDR, TAPE/MD, DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
Audio Input (DIGITAL IN)* :
Optical:DIGITAL 2 (CD) / 3(TV) / 4(CDR) / 5(MD):
Audio Output Level:
Recording Output Level:
Digital output:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
CD, CDR, TAPE/MD, DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
Frequency Response (8 ):
CD, CDR, TAPE/MD, DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
RIAA Phono Equalization:
Video
Video Input Sensitivity/Impedance:
Composite video: DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
S-video: DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
Component: COMPONENT 1(DVD) / COMPONENT 2:
Video Output Level:
Composite video: VCR 1, VCR 2, MONITOR OUT:
S-video: VCR 1, VCR 2, MONITOR OUT:
Synchronization:
Signal-to-Noise Ratio:
Front channels:
Front channels:
Center channel:
Surround channels:
Surround back channels:
PHONO (MM):
Coaxial: DIGITAL 1 (DVD):
SUB ROOM PREOUT:
PREOUT:
TAPE/MD, CDR, VCR 1, VCR 2:
Optical:
Signal wave length:
Output level:
PHONO:
PHONO
(Y: luminance):
(P /C , P
B B R
Component: MONITOR OUT
120 W per channel, min. RMS, driven into 8 , 20
Hz to 20 kHz with no more than 0.02% total
harmonic distortion.
120 W per channel, min. RMS, driven into 4 , 20 Hz to 20 kHz
with no more than 0.07% total harmonic distortion.
120 W per channel, min. RMS, driven into 8 , 20 Hz to 20 kHz
with no more than 0.02% total harmonic distortion.
120 W, min. RMS, driven into 8 , 20 Hz to 20 kHz with no more
than 0.02% total harmonic distortion.
120 W per channel, min. RMS, driven into 8 , 20 Hz to 20 kHz
with no more than 0.02% total harmonic distortion.
120 W per channel, min. RMS, driven into 8 , 20 Hz to 20 kHz
with no more than 0.02% total harmonic distortion.
2.5 mV/47 k
200 mV/47 k
0.5 V(p-p)/75
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital
Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
200 mV
1 V
200 mV
DIGITAL OUTPUT
660 nm
–21 dBm to –15 dBm
70 dB/78 dB (at REC OUT)
92 dB/80 dB (Line Direct On)
20 Hz to 20 kHz (±1 dB)
10 Hz to 100 kHz (+1 dB, –3 dB)
±1.0 dB (20 Hz to 20 kHz)
1 V(p-p)/75
(Y: luminance):
(C: chrominance, burst): 0.286 V(p-p)/75
1 V(p-p)/75
/C : 0.7 V/75
R)
1 V(p-p)/75
(Y: luminance):
(C: chrominance, burst): 0.286 V(p-p)/75
(Y: luminance):
(P /C , P /C :
B B R R)
Negative
45 dB
1 V(p-p)/75
1 V(p-p)/75
1 V(p-p)/75
0.7 V/75
Continued on the next page.
76