Installing The Discharge Chute; Adjusting The Control Cable; Product Overview - Toro 38587 Operator's Manual

2

Installing the Discharge Chute

Parts needed for this procedure:
1 Discharge chute
1 Chute handle
3 Phillips head screws
3 Washers
3 Locknuts
Procedure
Install the discharge chute as shown (Figure 7).
Figure 7
3

Adjusting the Control Cable

No Parts Required
Procedure
Refer to Adjusting the Control Cable in Maintenance.

Product Overview

1. Rotor blades
2. Chute Deflector
3. Discharge chute handle
4. Ignition key
5. Handle knobs
6
Figure 8
6. Control bar
7. Recoil start handle
8. Handle
9. Fuel tank cap