2. Installing the Discharge
Chute
1
Discharge chute
2
Washers
2
Locknuts
1
Knob
Procedure
1. Position the holes in the sides of the discharge chute
over the bolts ends on the sides of the chute handle.
(Figure 4).
1. Discharge chute
2. Bolt ends
2. Secure the sides of the discharge chute with 2
washers and 2 locknuts.
3. Rotate the discharge chute to the upright position.
4. Install the knob tightly onto the bolt end at the rear
of the discharge chute.
Figure 4
3. Knob
Product Overview
1. Discharge chute
2. Chute handle
3. Handle
1. Choke lever
2. Key switch
3. Primer
6
Figure 5
4. Control panel
5. Rotor blade
6. Fuel tank
Figure 6
4. Recoil start
5. Electric-start button
(model 38182 only)
6. Power cord (model 38182
only)